FREE Shipping on ALL Orders of $125 or More!
Showing 1–300 of 336 resultsSorted by popularity
Pair of Cast Iron Strap Hinges In Country Barn Style Barn Strap 9.75 inch strap hinges. Cast iron wall bracket with wrought iron strap. Perfect for: Front Doors, Bar Doors, and Cellar Doors. Sold as Pairs Only. Dimensions: 9.75 inches Long by 3.25 inches Wide by .75 inches in Projection. Strap: 7.75 inches Long from…
Hardware for New Home and Restoration of Older Homesthese Cast Iron Steeple Tip Hinges are part of a collectionof many sizes we offer ! Material : cast ironSpecs: 4″ by 4″ removable pin 6.5″ tip to tip Wonderful replica hardware for cabinet work , door hinges andso many more applications at a fraction of the…
3 Inch Victorian Steeple Hinge Hardware for New Homes and Restoration of Older Homes. These Cast Iron Steeple Tip Hinges are just part of the vast collection of door hardware that we offer ! Sold ONE hinge at a time. Pin is removable. Dimensions: 3 inches Tall by 3 inches Wide when laid flat. Tip…
7 Inch H Hinge Hand crafted door hinge with a powder coated finish. Quality / sturdy construction with colonial style look. Sold one at a time. *Dimensions may vary up to a quarter inch due to handmade nature. Dimensions: 7 inches Tall by 2.75 inches Wide (when laid flat). Height to Knuckles: 3.5 inches Tall. Construction:…
3.5 Inch Steeple Hinge This Victorian style cast iron piece of door hardware features a removable pin, fine detail casting, and a black painted finish. Hardware for New Home or old Home Restoration. This is just one of the many sizes we carry in our collection! Sold One at A time. Dimensions: 3 1/2 inches…
Victorian Style Steeple Hinge Renovation hardware for newer or older homes.These Cast Iron Steeple Tip Hinges are just a small part of the vast collection of door hardware that we offer. Pin is Removable. Screws are included. Dimensions: 6 1/2 inches Tall by 5 1/2 inches Wide. Specs: 5 inches Wide by 5 inches Long….
Hand Made Predrilled Wooden Plugs Dowel to fit 2 1/8″ predrilled door holes.These CAN be used for brand new doors, however most folks are looking to fill in the predrilled holes on antique doors. Pictures as shown. Glue and tap into place, then install your old fashioned / classic hardware as done in original installation.Save…
Fleur De Lis Style Handle in Cast Iron Black finish iron cabinet or door hardware. This item features a textured handle with spearhead shaped ends that act as mounts. Great for cupboards, shed doors, gates, dresser, etc. Sold one at a time. Screws ARE Included. Dimensions: 1 1/4 inches Wide by 5 1/8 inches Tall…
Victorian Era Design Door Hinge This solid cast brass, Victorian style door hinge features screwable tips allowing for removal of the pin in case you wish to move locations of your door without unscrewing the hinge. Screws are included. Dimensions: 4 inches by 4 inches. Steeple Tip to Tip: 6 1/2 inches. Construction: Solid Cast…
4" Colonial Cabinet Hinge This vintage style pair of H hinges is crafted from wrought iron and features a smooth surface. Reproduced after Colonial antiques, these era defined pieces of hardware add the perfect touch to your home restoration project. Sold ONLY as pairs. Screws ARE included. Dimensions: 4 inches Tall by 1 7/8 inches…
Victorian Era Design Door Hinge This solid cast brass, Victorian style door hinge features screwable tips allowing for removal of the pin in case you wish to move locations of your door without unscrewing the hinge. * variations in finish are not uncommon as this item is darkened by hand. Screws are included. Dimensions: 4…
Authentic Antique Replica Colonial Suffolk Thumb Latch Set Round bean shape tops. Comes with all screws and parts shown in photo. Hand Wrought Iron Antique Replica. Do Not be fooled by stamped look alike sets. These are hand made one at a time. Hand hammered and authentic. Main latch parts are hand made so sizes…
Cast Iron Cupboard Hinge These "rare" antique style pieces of cabinet hardware are a purists dream. Authentically reproduced for home restoration or repairs, and quality crafted from cast iron to replicate real antiques. Sold as Pairs Only * Small hand made cast iron hinges can vary a bit in size due to expansion and contraction…
Twisted Cabinet or Door Pull This item features a gnarled body that smooths out into spearhead like points. Black finish iron handle or pull. Great for cupboards, shed doors, gates, dresser, etc. Hardware in Hand Made Wrought Iron. Sold one at a time. Dimensions: 7 1/4 inches Tall by 1 3/16 inches Wide. Projection: 1…
Rectangular Cast Iron Rim Lock This victorian style, cast iron rectangular rim lockfeatures an exquisite original Victorian relief design,two white porcelain knobs, key operated dead bolt, and a privacy slide bolt. An antique reproduction of a turn of the century rim lock. Includes: two knobs, two skeleton keys, catch plate, rim lock, knob escutcheon, and…
Norfolk Thumb Latch Set Authentic hand hammered restoration hardware. The Norfolk Thumb latch set comes with all screws and parts shown in photo. Main latch parts are handmade so sizes may vary slightly. Do not be fooled by inferior sets that are Stamped Iron. The photos may look the same however our are authentic Colonial…
Pair of White Ceramic Door Knobs This pair of porcelain door knobs comes complete with two cast iron rosettes, not predrilled compatible, one spindle, and screws. * This is not intended for Pre-drilled doors. Dimensions: 2 1/8 inches in Diameter by 2 inches in Projection. Spindle Size : 1/4 inch Solid Spindle. Rosette Size: 2…
7 Inch HL Hand crafted door hinges. Quality authentic sturdy construction with colonial style look. Sold as PAIR of left and right. *Dimensions may vary up to a quarter inch due to handmade nature. Dimensions: 7 inches Tall by 7 inches Wide (when laid flat). Height to Knuckles: 3.5 inches Tall. Construction: Wrought Iron. Age:…
4 Inch HL Hinge Hand crafted door hinge. Quality / sturdy construction with colonial style look. Sold as PAIR of left and right. *Dimensions may vary up to a quarter inch due to handmade nature. Dimensions: 4 inches Tall by 4 inches Wide (when laid flat). Height to Knuckles: 2.5 inches Tall.Construction: Wrought Iron.Age: New
Turn of the century style replica victorian rim lock with pair of white porcelain knobs. For new or old renovations or building. Square Box Lock. Material : cast iron and porcelain Size: 4" by 3.75" overall size .75" wide keeper Fits 1/4" spindle knobs 2.25" back set to key hole and knob Knob size: 2…
Colonial Georgian Style Rim Lock Right Hand Surface box lock set for front or interior doors. Made from heavy, quality brass and featuring a polished brass finish, this Georgian style piece of door hardware is perfect for any new or old home renovations. Complete set as shown: Rim Lock, Key, Spindle, Two Knobs, a Rosette,…
Selling one PAIR ( two spindles ) for dummy applications The one inch diameter base mounts to the door, and is covered by a rosette or back plate. The mounting post is 5/16 inches in Projection for the doorknob to attach. Can be used with set screws or on doorknobs requiring threaded spindle 16tpi (antique…
Oval Colonial Style Key Hole *Made From: Solid Cast Brass Great for ANY Home, Room, or DoorKeyhole Classic Colonial Smooth Cover Comes with a Swivel Top CoverSize: 1.75″ Tall by 1.25″ Width Aged: New Antique Reproduction
Our smallest door rosette or escutcheon back plate made of Cast IronSold as Pairs Only! Age: New antique ReproductionSize: 2″ diameterFits: 5/8″ diameter shaft knobs Construction: Solid Cast Iron with Black Powder Coated Finish More hard to find hardware from The Kings Bay
Black Porcelain Ceramic Door Knobs with cast iron base old Replica Hardware Size: 2 1/8″ diameter knobs with a 2″ projectionSpindle size : 1/4″ solid spindleWeight: .75lbs These are made with antique style spindle that you can slide your knobs up anddown on to fit the thickness of your door. Why spend all your time…
***If you would like to order more than the quantity shown please contact us at 800-910-3497 sales@thekingsbay.com or chat for our bulk inventory of this item. Most of our door hardware can be produced in much higher quantities than shown."We are more than ready to serve you right now.*** Bronze Privacy Latch Set This piece of standard privacy…
Strap Hinge for Door or Gate 24 Inch Length. Black finish iron door hardware. This item features a smooth, flat body with an arrow head shaped tip. Wonderful craftsmanship on this Hand Wrought hinge. Colonial style door or gate hinge. Dimensions – Whole: 24 inches Long by 2 3/4 inches Wide. Strap: 17 inches Long…
Turn of the Century Style (replica) Victorian Rim Lock for new or old renovations or building.RECTANGULAR Box Lock with pair of white porcelain knobs. Material : cast iron.Use for right or left hand doors – on site reversible. Overall Size: 5″ Wide by 3.25″ Tall Rim Lock without Keeper: 4 1/4″ Wide by 3 1/4″…
12 Inch H Hinge Hand crafted door hinge. Quality / sturdy construction with colonial style look. Sold one at a time. *Dimensions may vary up to a quarter inch due to handmade nature. Dimensions: 12 inches Tall by 3 3/8 inches Wide (when laid flat) Height to Knuckles: 4.75 inches Tall. Construction: Wrought Iron. Age:…
Leaf Motif Door Knob Pair This classic-vintage style pair of round door hardware is expertly hand casted in solid brass and features a polished finish. Sold only as Pairs. * Fits up to 2 1/2 inch door thickness. Dimensions: 2 1/8 inches in Diameter by 1 3/4 inches Long. Spindle: 1/4 inches. Construction: Hand Cast…
Our smallest door rosettes / back plate made of Cast Iron Age: New antique ReproductionSize: 2″ diameterFits: 5/8″ diameter shaft knobs Sold in Pairs of 2Construction: Solid Cast Brass( other finishes also available are darkened bronze and tiffany green )More hard to find hardware from The Kings Bay
Colonial Door Hardware Slide bolt latch with catch. Comes with a flat end with curled tip to use as a handle. Can also be used as a tower bolt. Great size for crawl spaces, attics, and pantries. Dimensions: 4 inches Long by 1 7/16 inches Wide by 1 3/16 inches Tall Distance Between Stops: 1/2…
Hand Hammered Iron pulls created just like in the days gone by. Heated and hammered thick iron Bean shaped ends with screws included Uses for cabinet or door handle Age: New Construction: Iron Size: 6 inch length with a 1.75 inch wide at bean – sizes will vary due to the hand crafted nature –…
Cast Iron Rim Lock Surface box lock set for interior doors. Made from heavy cast iron and featuring a matte black painted finish, this Victorian style piece of door hardware is perfect for any new or old home refurbishment. Complete set as shown: Rim Lock, Key, Keeper, and Escutcheon. Use for right or left hand…
Find timeless beauty and unrivaled safety with our rim lock collection by The Kings Bay. Our rim locks created with precision bring in the charm of the olden times coupled with the strength required by the modern security demands. Our rim locks are suitable for people who like the vintage design but want to maintain their houses safety features they are perfect in the restoration projects or in modern homes where they want to bring in a little of the classic style.
At The Kings Bay, we realize that the small things count. So in our collection we give each rim lock the quality and design it deserves. Our selection is crafted to match any décor from the ornate Victorian styles to more sedate, traditional looks. No matter whether you’re modernizing a historic home or putting personality into a new build, our rim locks give you both the desirable aesthetic and peace of mind.
As they are easily to insert and fit with a variety types of doors, The Kings Bay rim locks are not only about beauty; they are about carrying the longevity and character of history into the present. Come and browse through our collection and get the best rim lock for your space.
Iron Thumblatch Keeper Replacement Iron Keeper for Thumblatch.These keepers are compatible with all antique styles:Norfolk, Suffolk, Colonial, ETC. This common piece of hardware is frequently lost by our customers, so in a response to combat that issue we have produced these in bulk. Sold 1 at a time, reversable Dimensions: 2 inches Long by 1…
Very Hard to Find Mini Brown door knobs Antique Reproductions Brown Porcelain Ceramic Door Knobs. Size: 1.75" diameter knobs with a 2" projection Spindle size : 1/4" solid spindle Weight: .75lbs Great for closets and other applications Why spend all your time at flea markets and bargain shops looking for the perfect new or replacement…
Stunning New York City Door Knobs This wonderful piece of door hardware is hand cast from an authentic antique replica Public School Knob and comes with a polished finish. Spindle is Included. Spindle size is 3/8 inches – 16. Sold as a Pair. Another of The Kings Bay exclusive hand crafted hardware pieces. Dimensions: 2.5…
Colonial Door Hardware Slide bolt latch with two styles of catches. One is faceplate style strike while the other one is raised catch. Comes with a flat end to use as a handle. Can also be used as a tower bolt. Dimensions: 7.5 inches Long by 1.75 inches Wide by 1.75 inches Tall Strike: 1…
“The Melbourne” Handle Quality crafted from solid cast brass and showcasing a regal design, The Melbourne cabinet or door handle features a hand highlighted bronze finish and decorative ends. Sold one at a time. Screws are included. * variations in finish are not uncommon as this item is darkened and highlighted by hand right here…
Traditional Style Door Handle Black finish iron entry hardware. This item features a hammered edge, rectangular handle that is attached to a smooth, flat back plate. A classic design for any home or business. Sold one at a time. Dimensions: 12 1/8 inches Tall by 3 1/8 inches Wide. Projection: 2 1/2 inches. Distance Between…
The "Wells" Door Back Plate Pair Constructed from solid brass and featuring a oil rubbed finish, these Victorian style door knob back plates come wide enough to cover a standard predrilled hole and are sold only as pairs. Great for home restoration projects. NO KEY HOLE! Sold ONLY as Pairs. Screws ARE Included. Back Plate:…
Cast Iron Rim Lock Surface box lock set for interior doors.Made from heavy cast iron and featuring a matte black painted finish, this Victorian style piece of door hardware is perfect for any new or old home refurbishment. Complete set as shown: Rim Lock, Key, and Escutcheon. Use for right or left hand doors –…
Fan Design Commercial Handle Set This pair of HEAVY DUTY commercial or residential push plates is constructed from THICK solid cast brass and features a polished brass finish. Sold as a set ONLY. Screws are included. Dimensions: 16 inches Tall by 3 inches Wide (EACH). Handle Projection: 2 1/4 inches. Push Surface: 2 1/2 inches…
Nightmare Inspired Door Handle Hand Wrought Iron Black finish iron door pull. This item features a smooth, thin body with curling ends. A vertical lip rises down the center of the handle. Dark fantasy inspired door hardware. Sold one at a time. To make a set just flip one over and you can use as…
Porcelain Knob Set This stunning brass necked, porcelain knob set comes quality crafted with a singular threaded spindleand installation hardware. The perfect addition to your vintage remodel. Great for Rim Locks or Individual use. Set includes: 2 Porcelain Doorknobs (Black or White Choice),A Threaded Spindle, 2 Set Screws, and An Allen Wrench. Dimensions: 4 1/2…
Hand Hammered Iron pulls created just like in the days gone by. Heated and hammered thick iron. Bean shaped ends with screws included. Uses for cabinet or door handle. Black Painted Finish Age: New Construction: Iron Size: 8 inch length with a 2 1/4 inch width at bean and a 2 3/8 inch Projection. –…
12 Inch HL Hinges Pair Hand crafted door hinge. Quality / sturdy construction with colonial style look. Sold as PAIR of left and right. *Dimensions may vary up to a quarter inch due to handmade nature. Dimensions: 12 inches Tall by 12 inches Wide (when laid flat). Height to Knuckles: 5 inches Tall.Construction: Wrought Iron.Age:…
Stunning New York City Door Knobs made from cast solid brass withan antique oil rubbed bronze finish. Replicated from original Public School Handles.Comes with Spindle. Spindle size is 3/8 inches – 16. Sold as a Pair. Another of The Kings Bay exclusive hand crafted hardware pieces. Dimensions: 2.5 inches Tall by 1 5/8 inches Wide….
***If you would like to order more than the quantity shown please contact us at 800-910-3497 sales@thekingsbay.com or chat for our bulk inventory of this item. Most of our door hardware can be produced in much higher quantities than shown.”We are more than ready to serve you right now.*** Brass Privacy Latch Set This piece of standard privacy…
Hardware for New Home and Restoration of Older Homesthese Cast Iron Steeple Tip Hinges are part of a collectionof many sizes we offer ! Material : cast ironSpecs: 2.5″ by 2.5″ removable pin 4 5/8″ tip to tip Wonderful replica hardware for cabinet work , door hinges andso many more applications at a fraction of…
Victorian Door Hardware Back Plate Rosettes In Aged Bronze Cast Brass Sold in Pairs The " Sunburst " Very handsome vintage replica door hardware for old or new home restoration Sold in Pairs of 2 Age: New Construction: Cast Solid Brass Finish: Aged Bronzed Size: 4.75" tall by 2.25" wide diameter of hole for knob…
WROUGHT IRON RIGHT HAND CARPENTERS RIM LOCK OLD HOME RESTORATION HARDWAREwith BRASS KNOBS and Swing Key Hole Cover This one shown is right hand , make sure you order the correct“handing” direction for your doorAntique REPLICA Restoration Hardware for Older Homesor new replica home – houses!Carpenters Rim Lock with knobs Right hand is shown in…
Triple Horn Rams Head Shape Door Handle or Pull Black finish iron door hardware. This item features a twisted body with triple split ends that curl into pointed tips. Dark fantasy style ironware. Sold one at a time. Construction: IronDimensions: 8 inches Long by 2 1/2 inches WideProjection: 3 3/8 inchesDistance Between Holes: 1 inchWeight:…
Contorted Iron Door Handle Black finish, wrought iron door pull. This item features a twisted, roped shaped body with flat, rounded ends. Nautical design entry hardware. *Sold one at a time. Dimensions: 8 inches Long by 3/4 inches Wide. Projection: 2 1/16 inches. Distance Between Holes: 5 3/8 inches. Construction: Wrought Iron. Age: New.
New or Old House Hardware piece like this Victorian door back plates are just part of the hot line at America's source for vintage Replica Hardware Name: The Rice Sold in Pairs of 2 Size: 5 1/8" tall by 2 1/8" wide 5/8" hole for knob .35 lbs solid brass construction 2.25" from center of…
This Old House or This New House , your new ringing twist handle doorbell ( manual twists ) will be loved by everyone who see , or uses it … Construction : solid cast brass with steel works inside Finish: Antiqued DARKENED Brass Size: 5.5" by 3.75" wide (outside rectangular plate is 3 3/8" by…
PUSH Square Door Plate Finished with a highlighted bronze over solid brass, this PUSH plate features old fashioned textured lettering. If you wish to see our matching PULL plate or our complete set, please see our separate listings. * variations in finish are not uncommon as this item is darkened and highlighted by hand right…
Pack of Replacement Spindles (2pcs) Square Drive Threaded Shaft. Old fashioned style.Sale priced, hard to find spindles. Dimensions: 4 inches Long by 9/32 inch Spindle with 16 Threads per inch. 1/4 – 16
We have replicated this wonderful twist bell for your Old House or your New House. Turn handle doorbell , manually twists. It will be loved by everyone who sees or uses it . Fits up to 2 inch thick doors . If the stem of the turn key is too long simply use a hack…
Factory Design Commercial Door Handle Black finish Cast iron pull / handle for door. This piece of hardware resembles piping, and is fine compliment to an Industrial theme. This item features a pole shaped body with rounded ends. *Sold one at a time Dimensions: 13 5/8 inches Long by 1 3/8 inches Wide. Projection: 2…
Shell Top Early Era Door Hardware Plates Sold as PairsThese back plates are a classic 1920’s stylemade brand new for you by The Kings BayClassic Vintage Replica Door Plates Sold in Pairs of 2Size: 6.25″ by 2.25″ wideknob hole size : 5/8″Finish: Darkened Aged BronzeConstruction: Aged Bronze over Solid Cast Brass
Bronze Dresser or Trunk Pull Stylish French inspired cast brass dresser or drawer pull with Fleur de Lis designed ends.Also makes for great trunk or chest handles or as a sliding glass door pull. Sold one at a time.Screws are included. Dimensions: 6.75 inches Long by 1.5 inches Wide with a Projection of 1.25 inches.Construction:…
Pair of The Vermont Door plates. *Made from: Solid brass. Great for ANY Home, Room, or Door. Wonderful door plate to Highlight any room! Size: 8" T X 2 1/8" W. Fits door knob size 5/8" Aged: New antique reproduction. Sold as Pairs.
Fan Design Commercial Handle Set This pair of HEAVY DUTY commercial or residential push plates is constructed from THICK solid cast brass and features a hand done, aged bronze finish. Sold as a set ONLY. Screws are included. * variations in finish are not uncommon as this item is darkened by hand. Dimensions: 16 inches…
Commercial Push Plate Made from thick cast brass, this push plate features a smooth, neutral design that allows for versatility with any layout or theme: Business, Restaurant, Hotel, etc. Made for commercial business use, but will also work for residential renovation. Screws are included. Dimensions: 16 inches Tall by 4 1/8 inches Wide by 1/2…
Arts and Crafts or Bungalow Push Plate. Aged Oil Rubbed Bronze Finish over Commercial Brass. Hand hammered push plate. Great for commercial locations. ( screws included) Construction: Heavy Cast Brass (Solid).Size: 15 inches Tall by 3 1/2 inches Wide.Age: New.
Commercial Pull Plate Made from thick cast brass, this pull plate features a smooth, neutral design that allows for versatility with any layout or theme: Business, Restaurant, Hotel, etc. Made for commercial business use, but will also work for residential renovation. If you wish to purchase our matching push plate, please see our separate listings….
Kings Bay Slide Bolt Lock Collection offers the ultimate security in style and sturdiness. Slide bolt locks are created for homeowners who value security and form; they are efficient and good looking type of locks. Made from top-grade materials, every slide bolt in our range is designed to last, thus your home or office will be kept secure and attractive.
The Kings Bay provides numerous slide bolt lock designs for any need and decor style you may have, whether you are looking to add an extra level of security to your doors, gates, or cabinets. We have no equal when it comes to the variety of our range, from sleek, contemporary models to ornate, vintage-inspired pieces. Sliding bolt lock installation is a piece of cake and the operation is very smooth, so they would be a good solution for any location.
Feel the tranquility which is the result of the realization that your property is protected with a slide bolt lock from The Kings Bay. With our quality and customer satisfaction guarantee, you will be investing in the best. Check out our collection today and get the ideal slide bolt lock that will go well with your space and provide extra security.
Our smallest door rosettes / back plate made of solid brass Sold in Pairs Age: New antique ReproductionSize: 2″ diameterFits: 5/8″ diameter shaft knobsFinish: Aged Darkened Bronze Sold in Pairs of 2Construction: Solid Cast Brass( other finishes also available are darkened bronze and tiffany green )More hard to find hardware, from The Kings Bay
Cast Iron Dead Bolt Rim Lock Surface box lock set for interior doors. Made from heavy cast iron and featuring a matte black painted finish, this Victorian style piece of ornate door hardware is perfect for any new or old home refurbishment. Complete set as shown: Rim Lock, Key, Keeper, and Escutcheon. Use for right…
Suffolk Style Colonial Pull Comes with all screws and parts shown in photo.Do Not be fooled by stamped look alike sets. This item is hand hammered and era authentic featuring round bean shape tops. Hand Wrought Iron Antique Replica. These match the thumblatch set we carry also.Each is hand made so sizes will vary slightly….
Brass Passage Latch Set This piece of standard passage door hardware features a solid brass face plate, strike plate, and screws. Fits 1/4 inch split or regular spindles with a 2 3/8 inch backset. Sold one at a time. This listing is for our 2 3/8 inch Brass Passage Latch.if you wish to purchase a…
Commercial Opera House Style Door Pull This black finish, cast iron door handle features a thick, curved body, raised sides, and curling ends. Great for creating a grand entrance. French Decorative Curl Design. This item is cast iron with a powder coated finish. Sold one at a time. Dimensions: 15 3/4 inches Long by 1…
Commercial Steampunk Handle Set Curled tipped handle set with spring accent. Goes great with a themed home/establishment! Dark fantasy style entry hardware. *This is the smaller set. If you are interested, we have a bigger set as a separate listing. Dimensions: 12 1/16 inches Long by 3 3/4 inches Wide. Projection: 2 1/4 inches. Distance…
Rare Vintage Style Victorian Door Hardware Back Plates Rosettes In Solid Polished Cast Brass Sold in Pairs The " Sunburst " Very handsome vintage replica door hardware for old or new home restoration Sold in Pairs of 2 Age: New Construction: Cast Solid Brass Finish: Polished Size: 4.75" tall by 2.25" wide Diameter of hole…
Pair of The “Boston” Door Plates. This Victorian style piece of door hardware features a detailed ornate design, a standard escutcheon, and a swivel escutcheon. Carefully reproduced from an estate found antique, The Vermont brings a sophisticated feel to your home restoration or renovation. Sold only as pairs. Screws ARE included. Fits door knob size…
Hard to find vintage style spindles. Sold in set of 6 pcs. Door Spindles made for old fashioned porcelain knobs that have screw in bolts from the side. Very hard to find door spindles. Another exclusive from The Kings Bay. Age: New. Size: 4" long by 1/4" square with four screws holes. on each end…
Cast Iron Trunk Handles Sold as Pair Sold as a pair, these country style bail handles are an authentic antique reproduction and come quality crafted in cast iron. A genuine find for your home's restoration. Screws ARE included. Dimensions: 4 1/4 inches Tall by 4 inches Wide. Construction: Cast Iron. Age: New Reproduction.
This is a large Victorian Hinge, sold one at a time Why spend months searching for exact matches for your homewhen you can get the amount you need right here , and theywill all be the same ? * Size: 4.5″ by 4.5″ by 7.25″ tall tip to tip* Material : Cast Iron painted semi…
Hook and Eye Latch These high quality, solid brass cabinet latches feature fluid mobility and hook your door or cabinets with ease. Available in three separate sizes, these thick casted, smooth latches blend effortlessly with any home aesthetic. Screws ARE included. * Sizes may vary a little bit from latch to latch. Dimensions – 6…
Bronze Passage Latch Set This piece of standard passage door hardware features a solid brass face plate, strike plate, and screws. Fits 1/4 inch split or regular spindles with a 2 3/8 inch backset. Sold one at a time. This listing is for our 2 3/8 inch Bronze Passage Latch.if you wish to purchase a…
Bronze, Heavy Oval Door Knob Set Made from thick solid brass with custom oil rubbed bronze finish. This set is not only easy to install but durable. Both knobs together with the spindle weighs 2 lbs. To loosen, hold the knob furthest from you stationary while you twist the knob closest to you counterclockwise. If…
Blue Heron Push Plate Incapsulating the essence and feel of the Low Country, this detail piece of quality hardware welcomes serenity and comfort into your ever-growing life. Whether it be for your Office, Home, or Building Project, the lackadaisical feel of a warm southern day, is only a door away. Sold ONE at a time….
Large Woodland Style Door Handle This item features a branch design with smooth, flat ends. Forestry trait handle or pull with a black iron finish. Resembles a tree branch. Sold one at a time. Dimensions: 16 1/8 inches Tall by 1 1/8 inches Wide. Projection: 3 1/8 inches. Distance Between Holes: 12 3/8 inches. Construction:…
Wrought Iron Left Hand Carpenters Rim Lock Old Home Restoration Hardware with BRASS KNOBS and Swing Key Hole Cover This one shown is left hand , make sure you order the correct“handing” direction for your doorAntique REPLICA Restoration Hardware for Older Homes or new replica home/houses! Left hand is shown in photo. *Door Knob fits…
Oval Colonial Style Key Hole inAGED BRONZED DARKENED finish *Made From: Solid Cast Brass Great for ANY Home, Room, or DoorKeyhole Classic Colonial Smooth Cover Comes with a Swivel Top CoverSize: 1.75″ Tall by 1.25″ Width Aged: New Antique Reproduction
20″ American Eagle Plaque God Bless America! Adorning your home with patriotic freedom, this Solid Cast Brass eagle is most commonly used as threshold piece, greeting all who come and go with pride. Don’t let that stop your creativity though!This proud piece of decor can go on a variety of surfaces. Finished right here in…
Oriental Door Plates Sold as Pairs These narrow fit oriental design door plates feature a highlighted bronze finish and are sold in pairs ONLY. Fits door knob size 5/8 inches. Great for Any Home, Room, or Door!Wonderful door plates to Highlight any room! * PLEASE NOTE: these door plates are smaller than the average pre-drilled…
Thick Cottage Latch for Door or Gate Left Hand Mount Wrought iron door latch set with wax coated finish.This item features a spring style latch connected to a ringed handle. It also includes a catch, Separate handle with flower motif, and screws. Easy to install and not too heavy at 2.8 lbs. Overall Dimensions: 8…
French Style Dummy Strap Hinge with Spear End Black finish iron dummy door hardware.This item features a smooth, flat body with a Fleur De Lis inspired tip. Vintage style door accessories. Construction: IronDimensions: 18 1/8 inches Long by 2 3/4 inches WideAge: New
Leaf Motif Door Knob Pair This classic-vintage style pair of round door hardware is expertly hand casted in solid brass and features a polished finish. Sold only as Pairs. * Fits up to 2 1/2 inch door thickness. Dimensions: 2 1/8 inches in Diameter by 1 3/4 inches Long. Spindle: 1/4 inches. Construction: Hand Cast…
Colonial Thumb Latch Set This Colonial style set of gate hardware features a smooth bronze finish over brass and a universal function allowing for reversible situations. Left or right hand use. Comes with all parts shown in photos. Sold one at a time. Screws ARE included. Fits a maximum of 2 inch door thickness. Overall…
Cast Iron Victorian Thumb Latch Set. One more exclusive item from The Kings Bay These are stunning replicas of by gone era. This is an exact replica of an antique we purchased. The nice thing here is that it looks and works just like the original. Comes with all pieces in the photos. Screws are…
Twisted Door or Cabinet Handle Black finish iron handle or pull. This item features a contorted body that is bookended by pyramid shaped points. Great for cupboards, shed doors, gates, dresser, etc. Sold one at a time. Screws ARE included. *Matte black superior powder coated finish. Construction: Iron Dimensions: 7 7/8 inches by 3/4 inches…
Large Solid Brass Hasp for Heavy Duty Construction 5 inches in lengthEye catch is stationary Good for marine or home applications. Age: New Antique ReproductionConstruction: Solid BrassFinish: Polished BrassLength: 5 inchesWidth: 1.2 inchesScrews are included.
Antique REPLICA Restoration Hardware for Older Homes or new replica home/houses!Carpenters Rim Lock with knobs not included.Knobs available in black , brown bennington and solid brass atextra cost( see other listings ) Make sure to choose left or right hand when checking out! Right hand is shown in photo. Fits up to 3 inch thick…
PULL Square Door Plate Finished with either a Polished, Bronze, or Highlighted Bronze finish over solid brass, this PULL plate features an old fashioned textured lettering. If you wish to see our matching PUSH plate or our complete set, please see our separate listings. * variations in finish are not uncommon as this item is…
Very Hard to Find Mini Black door knobsand spindle Black Porcelain Ceramic Door Knob pairwith cast iron base old Replica Hardware Size: 1.75″ diameter knobs with a 2″ projectionSpindle size : 1/4″ solid spindleWeight: .75lbs Great for closets and other applications Why spend all your time at flea markets and bargain shops lookingfor the perfect…
Right Hand Thick Cottage Latch Wrought iron door latch set with wax coated finish.This item features a spring style latch connected to a ringed handle, and includes a catch, a separate handle with a flower motif, and screws. Easy to install and not too heavy at 2.8 lbs. Overall Dimensions: 8 inches Long by 4…
Large Commercial Twisted Door Pull Black finish hand wrought iron entry hardware. This item features a gnarled, rope-like body with pointed ends capped by rounded tips. It is mounted by dual spearhead style backplates. Medieval style door handle or pull. Sold one at a time. Construction: Hand Made Wrought Iron Dimensions: 19 1/4 inches Tall…
Victorian Style Pocket Door Pull Crafted from solid cast brass, this Victorian style pocket door pull features a distinctive antique design. This particular piece of hardware lifts from the bottom and pulls forward to function. Includes fastening hardware. Dimensions: 5 inches Tall by 1 inch Wide. Pull Piece: 2 3/8 inches in Projection. Construction: Hand…
Hand Made Twisted Cabinet Hardware This pair of cabinet pulls features gnarled bodies with smoothed out, spearhead-like points. Great for cupboards, shed doors, gates, dresser, etc. Sold in PAIRS ONLY. Screws are Included. Dimensions: 5 inches Tall by 1 inches Wide. Distance Between Holes: 3 5/8 inches. Projection: 1 1/4 inches. Construction: Hand Made Wrought…
Hummingbird Victorian Pocket Door Lock Latch Set Cast Brass The Kings Bay highest quality lock to old fashioned antique doors Made of cast brass. Overall dimensions: 3.75″ W x 8″ H Backset is 2-1/8″ Each flush pull measures: 2-1/2″ W x 5-1/4″ H with 3/8″ deep center recession Face Plate of Lock is 1.25″ by…
Barn Door Door Rollers Quality casted and built to last, this PAIR of solid aluminum barn door rolling brackets come reproduced from genuine antiques and features a matte black painted finish. Perfect for: Barn Doors, Closet Doors, Safety Doors, Etc. Sold ONLY as PAIRS. Dimensions: 11 1/2 inches Tall by 4 inches Wide. Bracket…
Large Chrome plated over Solid Cast Brass HaspHeavy Duty Construction 5″ lengtheye catch is stationary Great for home or marine hardware applicationsand priced at wholesale Age: NewConstruction: Chrome over solid brassSize: 5″ length by 1 1/8 inchesHole fits a lock just under 3/8″ Screws are included.
Colonial Surface Slide Bolt Slide bolt latch with catch. Comes with a flat end with curled tip to use as a handle. Can also be used as a tower bolt. Great size for doors. gates, and shutters. Dimensions: 8 1/2 inches Long by 2 1/8 inches Wide by 1 3/4 inches Tall Distance Between Stops:…
Large Dummy Strap Hinge for Door or Gate Black finish iron door hardware. This item features a textured, hammered look on its body with a Fleur De Lis Style Tip. Great for garage doors and gates. French design style door accessory. Reminds me of Poseidon's trident. Construction: Iron Dimensions: 24 3/16 inches Long by 7…
Pair of The ” Vesta ” Art Nouveau or Deco style door back plates in Aged Bronze Finish. Age: New Reproduction. Size: 9.25″ tall by 2 3/8″ at widest point. Knob hole size: 5/8″ diameter. Construction: Aged Bronze over solid brass. Yes screws included. Sold as Pairs.
Mini Brass Rim LockLot’s of folks use these for screen doors Great for any Home, Room, or French Doorespecially with a narrow backset Size: 2 3/4″ W x 3 1/2″TLock Body 2″ W X 3 1/2″T, Keeper is 3/4″W X 3 1/2″T1 1/4″ Backset Aged: New Antique Reproduction Construction: Solid BrassField reversible so can be…
High Quality Glass Door Knob Set Vintage style , made brand new. Clear Pressed Glass with solid brass neck or ferrule. Ferule is 5/8" in Dia. This knob will fit any plate or rosette, with opening for knob that is any larger than this. *If buying with an individual plate or rosette from us, the…
New or Old House Hardware piece like this Victorian door back plate are just part of the hot line at America’s source for vintage Replica Hardware. The Kings Bay. Name: The Rice Door Plates. Sold as PAIRS. Size: 5 1/8″ tall by 2 1/8″ wide. 5/8″ hole for knob. .35 lbs solid brass construction. 2.25″…
3.25 Inch Beaded Rosette Pair Large enough to cover a predrilled hole, the quality casted 3.25 inch door rosettes features beaded edging and either a polished brass or oil-rubbed bronze finish. Screws ARE Included. Screw holes are 3 inches apart. Sold only as pairs. Dimensions: 3 1/4 inches in Diameter. Neck/Ferrell Hole Accommodation: 5/8 inches….